MineOS service not starting!

MineOS-on-distro
1

I Installed MineOS on top of ubuntu 16.04LTS and everyting was going fine until I tried starting the service It says just says:

maxwell@MineOS:~$ sudo systemctl start mineos
Job for mineos.service failed because the control process exited with error code.
See “systemctl status mineos.service” and “journalctl -xe” for details.

systemctl status mineos.service:
● mineos.service - Start MineOS minecraft front-end
Loaded: loaded (/etc/systemd/system/mineos.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Sat 2020-03-28 21:18:50 PDT; 6min ago
Process: 22470 ExecStart=/usr/bin/node service.js start (code=exited, status=1/FAILURE)

Mar 28 21:18:50 MineOS systemd[1]: mineos.service: Service hold-off time over, scheduling restart.
Mar 28 21:18:50 MineOS systemd[1]: mineos.service: Scheduled restart job, restart counter is at 5.
Mar 28 21:18:50 MineOS systemd[1]: Stopped Start MineOS minecraft front-end.
Mar 28 21:18:50 MineOS systemd[1]: mineos.service: Start request repeated too quickly.
Mar 28 21:18:50 MineOS systemd[1]: mineos.service: Failed with result ‘exit-code’.
Mar 28 21:18:50 MineOS systemd[1]: Failed to start Start MineOS minecraft front-end.

and journalctl -xe:

Mar 28 21:20:08 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=18:66:da:2c:82:29:60:57:18:99:43:1e:08:00 SRC=10.0.
Mar 28 21:20:10 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=18:66:da:2c:82:29:60:57:18:99:43:1e:08:00 SRC=10.0.
Mar 28 21:20:11 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=18:66:da:2c:82:29:60:57:18:99:43:1e:08:00 SRC=10.0.
Mar 28 21:20:11 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=18:66:da:2c:82:29:60:57:18:99:43:1e:08:00 SRC=10.0.
Mar 28 21:20:14 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=18:66:da:2c:82:29:60:57:18:99:43:1e:08:00 SRC=10.0.
Mar 28 21:22:10 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=10.0.
Mar 28 21:22:10 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=10.0.
Mar 28 21:22:10 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=172.1
Mar 28 21:22:10 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=172.1
Mar 28 21:23:06 MineOS sshd[22501]: Invalid user admin from 45.238.121.184 port 41553
Mar 28 21:23:06 MineOS sshd[22501]: pam_unix(sshd:auth): check pass; user unknown
Mar 28 21:23:06 MineOS sshd[22501]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser
Mar 28 21:23:07 MineOS sshd[22501]: Failed password for invalid user admin from 45.238.121.184 port 41553 ssh2
Mar 28 21:23:08 MineOS sshd[22501]: Connection closed by invalid user admin 45.238.121.184 port 41553 [preauth]
Mar 28 21:23:13 MineOS sshd[22503]: Invalid user admin from 45.238.121.184 port 41578
Mar 28 21:23:13 MineOS sshd[22503]: pam_unix(sshd:auth): check pass; user unknown
Mar 28 21:23:13 MineOS sshd[22503]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser
Mar 28 21:23:15 MineOS sshd[22503]: Failed password for invalid user admin from 45.238.121.184 port 41578 ssh2
Mar 28 21:23:15 MineOS sshd[22503]: Connection closed by invalid user admin 45.238.121.184 port 41578 [preauth]
Mar 28 21:24:16 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=10.0.
Mar 28 21:24:16 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=10.0.
Mar 28 21:24:16 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=172.1
Mar 28 21:24:16 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=172.1
lines 1978-2000/2000 (END)
Mar 28 21:20:08 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=18:66:da:2c:82:29:60:57:18:99:43:1e:08:00 SRC=10.0.0.16 DST=10.0.0.10 LEN=52 TOS=0x00 PREC=0
Mar 28 21:20:10 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=18:66:da:2c:82:29:60:57:18:99:43:1e:08:00 SRC=10.0.0.16 DST=10.0.0.10 LEN=52 TOS=0x00 PREC=0
Mar 28 21:20:11 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=18:66:da:2c:82:29:60:57:18:99:43:1e:08:00 SRC=10.0.0.16 DST=10.0.0.10 LEN=52 TOS=0x00 PREC=0
Mar 28 21:20:11 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=18:66:da:2c:82:29:60:57:18:99:43:1e:08:00 SRC=10.0.0.16 DST=10.0.0.10 LEN=52 TOS=0x00 PREC=0
Mar 28 21:20:14 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=18:66:da:2c:82:29:60:57:18:99:43:1e:08:00 SRC=10.0.0.16 DST=10.0.0.10 LEN=52 TOS=0x00 PREC=0
Mar 28 21:22:10 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x
Mar 28 21:22:10 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x
Mar 28 21:22:10 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=172.16.12.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC
Mar 28 21:22:10 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=172.16.12.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC
Mar 28 21:23:06 MineOS sshd[22501]: Invalid user admin from 45.238.121.184 port 41553
Mar 28 21:23:06 MineOS sshd[22501]: pam_unix(sshd:auth): check pass; user unknown
Mar 28 21:23:06 MineOS sshd[22501]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=45.238.121.184
Mar 28 21:23:07 MineOS sshd[22501]: Failed password for invalid user admin from 45.238.121.184 port 41553 ssh2
Mar 28 21:23:08 MineOS sshd[22501]: Connection closed by invalid user admin 45.238.121.184 port 41553 [preauth]
Mar 28 21:23:13 MineOS sshd[22503]: Invalid user admin from 45.238.121.184 port 41578
Mar 28 21:23:13 MineOS sshd[22503]: pam_unix(sshd:auth): check pass; user unknown
Mar 28 21:23:13 MineOS sshd[22503]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=45.238.121.184
Mar 28 21:23:15 MineOS sshd[22503]: Failed password for invalid user admin from 45.238.121.184 port 41578 ssh2
Mar 28 21:23:15 MineOS sshd[22503]: Connection closed by invalid user admin 45.238.121.184 port 41578 [preauth]
Mar 28 21:24:16 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x
Mar 28 21:24:16 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x
Mar 28 21:24:16 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=172.16.12.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC
Mar 28 21:24:16 MineOS kernel: [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:58:23:8c:b6:a4:c6:08:00 SRC=172.16.12.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC
~

Anyone have any ideas on what the heck is going on?

2

Did you use This to install MineOS on your Ubuntu OS?

I remember running into this issue when I had forgotten a step when I reinstalled it.

When installing, it’s best to run all the install commands as root, starting/restarting it as root, then everything else with your normal user account. I can’t tell you how many times I’ve screwed up starting a new server when I copied the files over as root and attempt to start the server as mc. It breaks everytime.

3

Run as root:

cd /usr/games/minecraft
./reset_webui.sh

What is the output of this and /var/log/mineos.log?

4

I found the issue after going back through everything and reinstalling. When Installing I read every line and noticed that node was not the correct version and would not start. I was also forgetting something else. but thank you both for help. when trying to run the webui I noticed that it was broken becasue of node

2 Likes
5

@hexparrot question for you real fast, I started up a server, used worldpainter to paint the world, and rpelaced the regions, level and session files with the ones exported from World Paint.

Is this the best way to do it? It works but I dont know if It will break anything down the line. I assume its fine because Im just replacing the block files. but you might know more than me, I test locally first and then when enough changes are made and I am happy, Ill throw them on the server for my friends to give me feedback and look around

6

That’s a fine way to do it. If you were to try to edit the files over the network you may run into issues. Just remember to make backups before editing.